live:damonyao_2
-
Model
-
Material CodeCE-6012n-20V50A-H
-
Channel information
-
Number of ChannelsNumber of Channels per Cabinet: 12
-
Main Channel
通道特点：CC-CV恒流源与恒压源采用双闭环结构；
通道控制模式：独立控制；
通道并联：支持通道并联，并联后不支持脉冲和模拟测试；
-
Input Indicators
-
Input PowerAC380V±15% 50/60±5Hz
-
Power Factor≥99%（Full Load）
-
THDi≤5% (Full Load)
-
Input Impedance≥1MΩ
-
Input Power14.1 KW
-
Input Current21.5 A/per Phase
-
Efficiency90%
-
Noise≤65dB
-
Voltage and Current Testing SamplingFour Wire Connection (Same Port for Charging and Discharging)
-
Power Control Module TypeMOSFET
-
Input Power Wiring ModeThree Phase Five Wire
-
ProtectAnti Surge, Anti Islanding, Overfrequency and Underfrequency, Overvoltage and Undervoltage, Phase Lacking Protection, etc
-
Function and Performance Index
-
Simulation Step
充电模式：电流、功率；
放电模式：电流、功率；
切换：支持充放电连续切换；
截止条件：时间、行号；
下载数据量：最大支持100万行工况下载；
-
Voltage
Testing Range per Channel
Charging: 0V~20V；Discharging: 2V~20V；
Minimum Discharge Voltage
2V；
Accuracy
±0.02% of FS；
Resolution
24bit；
-
Current
Testing Rang per Channel: 0.25A~50A；
Accuracy (Independent Range): ±0.05% of FS；
Constant Voltage Cut-off Current: 50mA；
Resolution: 24bit；
-
Power
Output Power per Channel: 1KW；
Overall Output Power: 12KW；
-
Time
Current Response Time: ≤3ms；
Current Conversion Time: ≤6ms；
Minimum Step Time: 0.1s；
-
Charge and Discharge Mode
Charge and Discharge Mode
Constant Current Charging, Constant Voltage Charging, Constant Current and Constant Voltage Charging (Smooth Transition from Constant Current to Constant Voltage; Prevent the impact of current spike and large current on the battery in order to protect battery), Constant Power Charging
Constant Current Discharge, Constant Voltage Discharge, Constant Power Discharge, Constant Resistance Discharge
Cut-off Condition
Voltage, Current, Relative Time, Capacity, -ΔV
-
Simulation Step
Charging Mode: Current, Power;
Discharging Mode: Current, Power;
Switch: Support continuous switching between charge and discharge;
Cut off condition: Time, Line number;
Amount of Data Download: Maximum Support for 1 Million Line Simulation Download;
-
Pulse Step
Charging Mode: Current, Power;
Discharging Mode: Current, Power;
Minimum Pulse Width: 100ms;
Pulse No.: A single pulse step can support 32 different pulses;
Charge and Discharge Continuous Switching: One pulse step can realize continuous switching from charging to discharging;
Cut off condition: Voltage, Relative Time;
-
DCIR DC Internal Resistance TestSupport custom point fetching for DCIR calculation.
-
Security Protect
软件保护
掉电数据保护；
具有脱机测试功能；
可设定安全保护条件，可设置参数包括：电压下限、电压上限、电流下限、电流上限、延时时间；
硬件保护
防反接保护、过压保护、过流保护、过温保护等；
-
Data Management and Analysis
-
Step Setting ModeTable Editing
-
Data Record
Recording Conditions
Minimum Time Interva: 10ms；
Minimum Voltage Interval: 0.04V；
Minimum Current Interval: 0.1A；
Recording Frequency
100Hz；
-
DatabaseUsing MySQL database to centralized manage testing data.
-
Data Output ModeExcel, Txt
-
Curve TypeCustomizable Drawing, 4 Y Axes.
-
Barcode ScanningSupport barcode scanning function, and realize the management and traceability of historical data through battery barcode.
-
Communication Mode
-
Upper Computer Communication ModeBased on TCP / IP Protocol
-
Communication InterfaceEthernet
-
Lower Computer Communication Baud Rate1M Bandwidth
-
Upper Computer Communication Baud Rate10M～100M Self-adaption
-
Networking ModeSet up LAN through switch and router.
-
Communication Extension (Optional)Support CAN, RS485 communication and BMS communication, with DBC configuration function.
-
Environmental Requirements, Size and Weight
-
Working Temperature-10℃~40℃ (Within the range of 25 ± 10 ℃, ensure the measurement accuracy: the accuracy drift is 0.005% of FS / ℃)
-
Storage Temperature-20℃~50℃
-
Relative Humidity of Working Environment≤70% RH (No Water Vapor)
-
Equipment Size W*D*H600*800*1300(mm)
-
Aux Testing System (Optional)
-
Temperature Auxiliary Channel
Temperature Range: -40℃~200℃；
Temperature Accuracy: ±1℃；
Temperature Resolution: 0.1℃；
-
Voltage Auxiliary Channel
Voltage Range: 0V~5V;
Voltage Accuracy: ±0.05% of FS;
Voltage Resolution: 0.1mV;
-
Aux IntroductionIt is mainly used to monitor the surface and lug temperature in the battery test process. High Accuracy. The test data can be bound with the main voltage and current data. At the same time, the temperature can be used as the control condition and protection condition of the process step.
Global - English
